Portable 3 Phase Intelligent Phase Tester Ep8410b Ep Hipot

Product Description

Portable 3 Phase Intelligent Phase Tester Ep8410b Ep Hipot

General Information:
EP8410B The three-phase intelligent phase voltammeter is a multifunctional intelligent instrument designed for on-site testing. It consists of a host, current clamps (3), and test lines (4). The host uses a 3.5-inch true color LCD screen, graphical menu interface display, vector diagram instructions. The design of the small clamp head of the current clamp is easy to operate, and it is very suitable for places with dense wiring. The instrument can measure three-phase AC voltage, current, phase between voltages, phase between currents, phase between voltage and current, frequency, phase sequence, active power, reactive power, apparent power, without opening the circuit under test. Power factor, current vector sum, identify the transformer wiring group, inductive, capacitive circuit, test the secondary circuit and bus differential protection system, read out the phase relationship between the CTs of the differential protection groups, check the correct connection of the meter Otherwise, the maintenance of line equipment, etc., provides a safe, accurate and convenient smart instrument for the electricity inspectors. It is suitable for electric power, petrochemical industry, metallurgy, railway, meteorology, industrial and mining enterprises, scientific research institutions, metrology departments, etc. Especially suitable for electric energy billing system and relay protection system.

Specification

1. Baseline conditions and working conditions

Item	Baseline conditions	Working conditions	Remark
Ambient temperature	23ºC±1ºC	-10ºC~40ºC	/
Ambient humidity	40%~60%	<80%	/
Signal waveform	Sine wave	Sine wave	β=0.01
Signal frequency	50HZ±1Hz	45Hz~65Hz	/
Working voltage	7.4V±0.5V	7.4V±1V	/
Current amplitude when measuring phase frequency phase sequence	1A±0.1A	1mA~30A	Check general specifications for details
Voltage amplitude when measuring phase frequency phase sequence	100V±10V	1V~600V	/
Current amplitude when measuring power factor	1A±0.1A	10mA~30A	/
Voltage amplitude when measuring power factor	100V±10V	10V~600V	/
External electric field, magnetic field	Should be avoided
The position of the test wire under test	The tested wire is at the approximate geometric center of the clamps

2. General specifications

Function	Simultaneously test the current, voltage, phase, frequency, phase sequence, active power, reactive power, apparent power, power factor, current vector sum in the three-phase 380V / 220V power system to determine the transformer wiring group, inductive, capacitive Circuit, test the secondary circuit and bus differential protection system, read out the phase relationship between the CTs of the differential protection groups, check the correctness of the wiring of the watt-hour meter, repair the line equipment, etc.
Power	DC 7.4V large-capacity rechargeable lithium battery, USB charging interface, continuous working for about 10 hours when fully charged.
Rated current	About 180mA Max
Display mode	3.5 inch true color LCD display
Meter size	LWH:196mm×92mm×54mm
Clamp size	φ7.5mm×13mm
Sampling rate	About 3 times / sec
Measuring range	AC voltage: 0.00V ~ 600V
	AC current: 0.0mA ~ 30A
	Phase:0.0°~360.0°
	Frequency:45.00Hz~65.00Hz
	Active power:0.0W~12kW
	Reactive power:0.0VAR~12kVAR
	Apparent power:0.0VA~12kVA
	Power factor:-1~+1
	Current vector sum:0mA~60A
Resolution	Voltage:AC 0.01V
	Current:AC 0.1mA
	Phase:0.1°
	Frequency:0.01Hz
	Active power:0.1W
	Reactive power:0.1VAR
	Apparent power:0.1VA
	Power factor:0.001
	Current vector sum:1mA
Precision (Under baseline conditions)	Voltage:±(0.5% measuring range)
	Current:±(0.5% measuring range)
	Phase: ± 1 ° (Phase error under working conditions: ± 3 ° from 10mA to 30A; ± 5 ° below 10mA. When the current value is less than 5mA, in order to ensure that the current is accurately measured on the current phase, do not perform voltage measurement In the phase test of voltage to current, in order to ensure the accuracy of the measurement, the voltage needs to be not less than 5V and the current is not less than 5mA)
	Active power: ± (1.0% of range)
	Reactive power: ± (1.0% of range)
	Apparent power: ± (1.0% of range)
	Frequency: ± (1.0% of range)
	Power factor: ± 0.03
Phase sequence	Normal phase: U1, U2, U3 or I1, I2, I3 cursor flashes sequentially from left to right
	Reverse phase: U1, U2, U3 or I1, I2, I3 cursor flashes sequentially from right to left
Detection rate	About 2 seconds / time
Data retention	Press HOLDkey to keep the data during the test, the "HD" symbol is displayed
Data storage	99 groups
Charging interface	USB charging interface
Automatic shut-down	About 15 minutes after starting up, the meter will automatically shut down to reduce battery consumption
Backlight function	Yes, the backlight brightness can be adjusted
Voltage detection	When the battery voltage is lower than 6.5V, the battery voltage low symbol is displayed, reminding the battery to charge, and automatically shut down within 10S.
Weight	Host: 350g (with battery)
	Current clamp:170g×3
	Total weight:about 1.35kg
Test lead length	1.5m
Current clamp wire length	2m
Working temperature and humidity	-10ºC~40ºC, below 80%Rh
Storage temperature and humidity	-10ºC~60ºC, below 70%Rh
Input resistance	The input impedance of the test voltage is: 1MΩ

More details on Three Clamps Intelligent Phase Volt-Ammeter please contact EP Hipot Electric, we have professional tech team to design correctly designed products and systems.

Company Profile

Packing & Delivery

FAQ