| Customization: | Available |
|---|---|
| Connectors: | USB |
| Usage: | Network Cable Tester, HDMI Cable Tester, Audio Cable Tester, Coaxial Cable Tester, Digital Cable Tester |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
General Information: Live cable identifier, also known as cable identifier, multi-function cable identifier, and intelligent cable identifier, is designed for power cable engineers and cable technicians to solve the technical problems of cable identification. The user can accurately identify one of the target cables from the multiple cables through the instrument to avoid serious accidents caused by accidentally sawing the live cable. The cable identification starts from the operation of the two ends of the cable. It must be ensured that the double numbering at both ends of the cable is accurate. It consists of a receiver and a receiving flexible current clamp. When a live cable is identified, 10 cables can be pre-calibrated at the transmitting end and then received at the remote end, which greatly saves the operation time of engineering personnel and improves work efficiency. Transmitter: Recognize live cable, transmit signal to target cable during power cable identification, built-in high-function rechargeable lithium battery, automatic impedance matching, fully automatic protection. The transmitter adopts an integrated special toolbox design, using polypropylene plastic as a raw material, and adding a new type of composite filler for one-time injection molding, which has low density, strength, rigidity, hardness, wear resistance, heat resistance, and insulation performance. The cabinet can withstand a pressure of about 200kg. The large LCD of the host displays the remaining battery power in real time, with white backlight and dynamic indication of the transmitted signal. Transmitting clamp: When the live cable is identified, the transmitting clamp couples the signal sent by the transmitter to the target cable, the jaw size is Φ125mm, the transmitting clamp has directionality, and the transmitting signal flows from the arrow on the transmitting clamp. Energized identification: use caliper coupling to output pulse current, transmit four frequencies: 625Hz, 1562Hz, 2500Hz, 10kHz, couple to the target cable through the launch clamp (the target cable is a three-core armored cable), inject composite pulses into the cable core Current signal. This pulse current generates an electromagnetic field around the target cable for detection and identification by the receiver and the flexible current clamp. Because the pulse current has directionality, the detection also has directionality. De-energized identification: Directly output pulse current is used to inject a pulse-coded current signal into the cable core. This current generates an electromagnetic field around the target cable for the receiver, flexible current clamp to detect, decode, and identify. Because the current has directivity, the detection also has directivity. Receiver: handheld device, 3.5-inch color LCD screen, built-in high-speed microprocessor, combined with precise algorithm, to identify and decode the pulse-coded current signal of the transmitter The cable shows the signal strength and the detection result, which is exquisite and intuitive; the color scale bar is dynamically displayed, at a glance, the cable identification is successfully marked √, and the non-target cable is marked with x, which can quickly and automatically identify the target cable. At the same time, the test voltage range is AC 0.00V ~ 600V (50Hz / 60Hz), the AC current range is AC0.00A ~ 5000A (50Hz / 60Hz), and the current frequency can be measured from 45Hz to 70Hz. Flexible current clamp: Rockwell coil, with excellent transient tracking ability, can quickly identify the pulse code current generated by the transmitter, suitable for thick cables or irregular shaped conductors. The inner diameter of the jaws is about 200mm, which can clamp cables under Φ200mm, without disconnecting the measured line, non-contact measurement, safe and fast. Technical Specifications: 1. Baseline conditions and working conditions
2. Transmitter specifications
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
){kind=link}