Hand-Held Partial Discharge Detector Portable Pd Free Analyser

• Customization: Available
• After-sales Service: Onsite and Remote Guidance
• Warranty: 1or 2 Years Free Warranty Longlife Service
• Model NO.: EPJF-8000
• Max Diameter of Workpiece: 210*100*35(mm)
• Mass Scope of Workpiece: 0.4kg(Host)
• Type: Partial Discharge Test Machine
• Accuracy Grade: 0.1
• Display: LCD
• Control: Computer Control
• Weight: 0-100Kg
• Power Source: Battery
• Screen: 4.0 Inch RGB LCD Screen, Resolution 800*480
• Sampling Accuracy: 12bit
• Synchronization Mode: Internal Synchronization, External Synchronization
• Connector: USB Interface (Also Charger Input) WiFi
• Earphone: 8 Ohm Minimum
• SD Card: Standard Configuration 16g- 64G
• Built-in Battery: 3.7V/5000mAh Lithium Battery
• Operating Hours: Approx. 6 Hours
• Charger: AC 90-264V or DC 5V
• Operating Temperature: -20-+50c
• Humidity: 20-85% Relative Humidity
• UHF Measurement: 300-2000MHz
• AA Measurement: 1dB
• Hfct Measurement: 5mv/Ma
• Tev Measurement: 0-60 Dbmv
• Transport Package: Plywood Case
• Specification: 210*100*35(mm) 0.4KG(host)
• Trademark: EP Hipot Electric
• Origin: Wuhan, China
• HS Code: 9030390000
• Production Capacity: 500/Year

Product Description

General Information:

EPJF-8000 Hand-held Partial Discharge Detector can be widely used in partial discharge detection of power system, including high voltage switchgear, ring network cabinet, voltage / current transformer, transformer (including dry type transformer), GIS, overhead line, cable and other equipment insulation state detection, through the following indicators to measure the discharge degree of electrical equipment:

Partial discharge intensity detection: by measuring the discharge signal in one power frequency cycle, the partial discharge intensity is characterized according to the maximum value (dB) in the discharge pulse sequence.

Partial discharge frequency detection: by measuring the discharge signal in one power frequency cycle, the discharge pulse is extracted and the partial discharge frequency is characterized according to the number of discharge pulses.

Features:

-Configure different sensors to achieve partial discharge detection of almost all high-voltage electrical equipment.

-Provide time domain waveform, PRPD, PRPS and other discharge patterns to realize the analysis of different discharge types.

-Humanized man-machine interface facilitates data management of different devices.

-Built-in ultrasonic sensor and transient ground voltage (hereinafter referred to as TEV) sensor, which can be connected with special sensors such as transformers, GIS, overhead lines, cables, etc.

-Adopts non-intrusive detection method, no need to power off during the test process, no need to configure additional high voltage source, it is more convenient to use than traditional pulsed partial discharge detector.

-The test bandwidth range is 30kHz ~ 2.0GHz, which is suitable for detection principles of various frequency bands.


Technical Specifications:
 

TEV measurement		AE measurement
Measuring range	0-60 dBmV	Measuring range	-6dBμV to 68dBμV
Resolution	1dB	Resolution	1dB
Precision	±1dB	Precision	±1dB
Maximum pulse per cycle	1400	Frequency Range	20~200 kHz
Measurement frequency band	3~100MHz
AA measurement		UHF measurement
Measuring range	-6dBμV~68dBμV	Detection frequency	300-2000MHz
Resolution	1dB	Measuring range	0-60 dBmV
Precision	±1dB	Sensitivity	<1dBm
Sensor center frequency	40 kHz	Sensor frequency band	300-2000MHz
HFCT measurement
Sensor transmission impedance	5mV/mA
Detection frequency	1~30MHz
Sensitivity	≤50pC
Hardware
Shell	ABS
Screen	4.0 inch RGB LCD screen, resolution 800*480
Sampling accuracy	12bit
Synchronization mode	Internal synchronization, external synchronization
Connector	USB interface (also charger input) WIFI 3.5mm stereo headphone jack External sensor input interface
Earphone	8 Ω minimum
SD card	Standard configuration 16G ~ 64G
Built-in battery	3.7V/5000mAh lithium battery
Operating hours	Approx. 6 hours
Charger	AC 90-264V or DC 5V
Operating temperature	-20 ~ 50ºC
Humidity	20-85% relative humidity
Volume and weight	210*100*35(mm) 0.4KG(host)

 

More details about Hand-held Partial Discharge Detector EPJF please contact EPHipot Electric, we have professional tech team to design correctly designed products and systems.