Lead Acid Storage Battery Resistance Analyzer Cells Inner Impedance Tester

• Customization: Available
• Type: Storage Battery Tester
• Test Region: Internal Resistance
• Model NO.: EPFS520
• Functions: Battery Internal Resistance Measurement, Battery V
• Power Supply: DC 3.7V Lithium Battery
• Internal Resistance: 0.000mohm~3.100ohm
• Voltage Measuring: 0.000V~+/-71.00V
• Temperature Measuring: -10degree~60degree
• Max. Input Voltage: DC 70V
• Resistance Resolution: 1 Uohm
• Voltage Resolution: 1 Mv
• Internal Resistance Measurement: AC 4-Terminal Test
• Measuring Current: 2.0mA~200mA
• Temperature Measurement: Ntc Temperature Sensor
• Response Time: 200ms
• Measure Time: About 2 Seconds
• USB Interface: with USB Interface
• Power Consumption: 300mA Min / 500mA Max
• Transport Package: Carton or Plywood Case
• Specification: 190mm*121mm*51mm
• Trademark: EP Hipot Electric
• Origin: Wuhan, China
• HS Code: 9030899090
• Production Capacity: 2000/Year

Product Description

Lead Acid Storage Battery Resistance Analyzer Cells Inner Impedance Tester

General Information:
EPFS520 Battery Impedance Tester (also called Battery Internal Resistance Tester) is a measuring instrument used to measure the internal resistance, voltage and temperature of rechargeable batteries such as lead batteries and lithium batteries to determine the health of the battery. This instrument uses the AC 4-terminal test method to measure the internal resistance of the battery, which can measure the correct measurement value without being affected by the contact resistance between the test wire, terminal and battery electrode. It also has functions such as data storage, data access, alarm, and automatic shutdown. The whole machine is high-grade and beautiful, with wide measuring range, high resolution, convenient operation, easy to carry, accurate, reliable, stable performance, and strong anti-interference ability. It is an indispensable instrument for battery production, battery installation, equipment production, and equipment maintenance.

EPFS-2P Battery Impedance Tester is controlled by a microprocessor, and the internal 16-bit ADC can accurately detect the battery internal resistance, voltage and temperature. It is characterized by measuring without stopping the UPS system, using AC low-resistance measurement and noise reduction technology, without stopping the normal operation of the equipment under test, and measuring under the running state, which greatly shortens the test time. At the same time, it has the functions of data storage, histogram display, and data upload to the computer.

Resistance Measuring Precision:

Measuring Range	Max. Display	Resolution	Measuring Accuracy	Measuring Current
3 mΩ	3.100 mΩ	1 uΩ	±1.0 % rdg. ±10 dgt.	200 mA
30 mΩ	31.00 mΩ	10 uΩ	±1.0 % rdg. ±6 dgt.	200 mA
300 mΩ	310.0 mΩ	100 uΩ		20 mA
3 Ω	3.100 Ω	1 mΩ		2 mA

Voltage Measuring Precision:

Measuring Range	Max. Display	Resolution	Measuring Accuracy
7 V	±7.100 V	1 mV	±0.1 % rdg. ±6 dgt.
70 V	±71.00 V	10 mV

Temperature Measuring Precision:

Measuring Range	Max. Display	Resolution	Measuring Accuracy
-10.0ºC~60.0ºC	60.0ºC	0.1ºC	±1.0ºC

Note:
The above accuracy guarantee is limited to the factory standard test leads. When using non-standard test leads or extension cables, this accuracy table is also applicable after zero adjustment.

Main technical data table:

Functions	Battery internal resistance measurement, battery voltage measurement, temperature measurement
Accuracy guaranteed temperature and humidity	23ºC±5ºC, below 75%rh
Power supply	DC 3.7V lithium battery
Resistance resolution	1 uΩ
Voltage resolution	1 mV
Temperature resolution	0.1ºC
Measuring range	Internal resistance measurement: 0.000mΩ~3.100 Ω (composed of 4 ranges)
	Voltage measurement: 0.000V~±71.00V (consisting of 2 ranges)
	Temperature measurement: -10.0ºC~60.0ºC (single range configuration)
Maximum input voltage	DC 70V (between + measurement terminal and-measurement terminal), no AC input
Measurement method	Internal resistance measurement: AC 4-terminal test method, open terminal voltage 3V max Measuring current: 2.0mA~200mA (different measuring currents in different ranges) Temperature measurement: NTC temperature sensor (10KΩ at 26ºC) A/D conversion method: successive approximation type Display update frequency: 5 times/second
Response time	200ms
Measure time	About 2 seconds
LCD size	70.1mm×52.6mm / 3.5 inches (320*240 resolution 16-bit true color screen)
Instrument size	LWH: 190mm×121mm×51mm
USB interface	With USB interface, the stored data can be uploaded to the computer, saved and printed
Communication	USB
Hold and store function	There are manual retention and storage, automatic retention and storage
Alarm function	When the measured value exceeds the alarm set value, an alarm will be issued
Battery voltage	Real-time display of battery power, reminding to charge in time when battery voltage is low
Automatic shut-down	There is no operation when power on, and it will automatically power off after about 15 minutes (this function can be turned off in the settings)
Power consumption	300mA MIN / 500mA MAX
Quality	Meter: 480g (including battery)
Working temperature and humidity	-10ºC~40ºC, below 80%RH
Storage temperature and humidity	-20ºC~60ºC, below 70%RH
Insulation resistance	Above 20MΩ (500V between circuit and case)
Withstand voltage	AC 3700V/RMS (between circuit and case)
External magnetic field	<40A/m
External electric field	<1V/m
Suitable for safety regulations	IEC 61010

More details on Battery Impedance Tester  EPFS520 please contact EPHipot Electric, we have professional tech team to design correctly designed products and systems.